Add to Cart:

X-Scooter PTB Retrofit kit


Power Tool Battery For All X- Scooters

Now available the benefits of a power tool battery in older scooter models: Echo, Sierra and Cuda 400.

Get rid of that old NiMh battery and replace it with the power of lithium.  The benefits are huge, off the shelf batteries available worldwide, fast charging and lower cost.

This product will mount two Power Tool Batteries in your scooter providing 36v and upto 480 Wh of capacity, depending on which batteries you purchase.

It does require your scooter to have programable electronics, so the settings can be changed to suit the new battery. These have been standard for a while, but older models may not have them.

To check, all programable electronics have a small connector on the wires going to the reed switch.  If you don’t have just add the electronics upgrade to your purchase.

Range and runtime comparisons will depend on the Wh capacity of the original battery vs the Wh of the Power tool packs you purchase. 

If your NiMH batteries are older than 2-3 years the capacity could be reduced and you will see an increase, even if the original capacity was more than the PTB. Cuda owners will experience a small reduction in top speed.

This product will be significantly lighter than your original battery so you will need to change your weighting accordingly so the kit includes 4 weight pouches to enable you to add weight to the nose of your scooter.

Pack Compatability

Compatible with all packs that fit the DCB interface. These are sold as 20v in the USA and 18v in the EU and rest of the world. Two packs of exactly the same type, and ideally similar age, MUST be used.

The following batteries have been tested with the product:

    2 x Batteriol 20V 5.0Ah Lithium Battery
    2 x LiBatter 20V MAX 6.0Ah Lithium Battery
    2 x Dewalt DCB612 20V/60V Max FlexVolt 12.0 AH Battery (Highest Performance In Testing)
    2 x Dewalt DCB548 18V/54V XR FlexVolt 12.0 AH Battery UK & EU (Highest Performance In Testing)
    2 x Dewalt DCB609 20/60v Max FlexVolt 9.0 AH
    2 x Dewalt DCB547 18V/54V XR FlexVolt 9.0 AH Battery UK & EU

Whats in The Box

Included in the box will be:

    PTB Conversion Module
    4 Weight Pouches – 4 Velcro Strips

    Programable electronics upgrade kit
You may also need:
    Programing Interface
    Retaining kit (If you have lost your old battery retaining rings)

You will need to source two DCB compatible battery packs and charger locally.  Two packs of exactly the same type, and ideally similar age, MUST be used.

This kit also uses the retaining ring from your old battery, if yours is lost or broken, please add another to your order.

  • Manufactured by: Dive Xtras

  • Your IP Address is:
    Copyright © 2022