Add to Cart:

Please note: This product has a lead time of 14 days

Piranha Smart Slice

£1,500.00

 

 

The Smart Slice combines features people have been requesing for years:

  • Fuel gauge
  • Vacuum leak detector
  • 12v Power Outlet
  • Emergency Cutoff

Fuel Gauge
The fuel gauge measures how much energy you have used on your dive in Amp Hours (Ah).  During the dive you can use this number to monitor how much battery you have.  The system is comparable with all Piranha batteries.  For example, a new P1 has approx. 10Ah of battery capacity, if you dive and the fuel gauge displays 5Ah, you know you have consumed approximately half your battery.  The gauge allows you to monitor the capacity of your batteries as they age. If you want to measure exactly how much battery capacity you have, you can simply dive till the battery is exhausted, and record the final number.

Vacuum Leak Detector
The leak detector system consists of a quick release vacuum fitting, a pump and an electronic pressure monitor.  Before the dive you can use the pump to suck a vacuum on the scooter.  The level of vacuum is indicated on the display unit by the bar along the bottom.  When the bar has stopped flashing, and has extended all the way to the right, the vacuum level is approx. 5in Hg. If you see no deterioration in vacuum after ten minutes, which would be indicated by the bar dropping and flashing, you can safely assume your scooter is leak tight and go diving.

Power For Suit Heaters and Video Lights
A standard EO connection provides 12v DC power, 50w max. This power can be used for lights, suit heaters or any other application that uses 12v. The EO plug is live at all times so you will want to keep the connector covered at all times. It is supplied with a dummy plug for this purpose.

Emergency Cutoff
The emergency cutoff is for those rare situations where you want to kill the scooter. Pulling the red marked plug will disconnect all power to the scooter motor and electronics, stopping it instantly.
The plug has a tether to prevent accidental loss.

 

Important Facts
The smart slice is connected to your Piranha battery inside the scooter using the provided wiring harness. As soon as its connected the 12v output is live. A dummy plug is provided for the E/O connector and should be used at all times to prevent corrosion of the connector pins.

Specification:

    Output Voltage: 12v DC
    Max. Voltage Deviation: ±0.125%
    Max Output Power: 50w
    Max Output current: 10A continuous, 15A for 30 min.
    Connector: 1 off Standard 2 pin Diving E/O connector.
    Option: Additional port is provided for 2 E/O connectors.
    Input Voltage: 18-75v DC.

Do not leave connected to your Piranha battery for extended periods when not in use. The power slice draws a small amount of current at all times and it will slowly discharge your battery.
 
Piranha Module
The Piranha Smart Slice is a Piranha module, it can be used on any Piranha scooter. It is neutrally buoyant and balanced and has a removable weight plate to accommodate diving in both salt and fresh water. It comes weighted and ready to dive. The Smart Slice is compatible with both the lithium and travel batteries.


  • Manufactured by: Dive Xtras

  • Your IP Address is: 54.92.190.11
    Copyright © 2018 deep-ideas.co.uk.