Piranha PTB - Module Only - No Packs

Piranha Power Tool Battery Module  – Battery Packs NOT supplied.

These power modules can be used in combination with the previous generation of Piranha Batteries and up to three can be used with a single Piranha tail.

A 5.0Ah pack must be used to achieve the rated performance. Other packs may work; however, performance and buoyancy will be affected.

Battery is not compatible with all packs that fit the DCB interface. You can buy many different packs, with a wide range of capacities. ONLY 5Ah batteries will fit inside the PTB Module housing.

To use the purchaser will need to source the individual power tool batteries as described below and the relevant chargers

Compatible with 5Ah, 20v (USA only) or 18v batteries that fit the DCB interface.

Tested with the following batteries:

    4 x Tenmoer Brand 20V 5.0Ah Lithium Battery
    4 x Waitley 20V 5.0Ah Lithium Battery
    4 x Amityke 20V 6.0Ah Lithium Battery
    4 x Vanttech 20V 6.0Ah Lithium Battery

Prior to recent DeWalt pack changes these were an option:

    4 x Dewalt DCB205 (USA) 20v Max 5.0Ah (pre-2023 models only)
    4 x Dewalt DCB184 18v XR (pre-2023 models only)

Comes with:

• PTB Module Body Tube
• Salt and freshwater trip weights
• Universal Strap to be used in P2 or P3 configuration